Home / Practice / NEBOSH IGC / Workplace hazards / 10.3 Fire alarms and fire-fighting

10.3 Fire alarms and fire-fighting

Written by Imran Qureshi (NEBOSH)

15 NEBOSH IGC Workplace hazards questions with answers and explanations.

Printable worksheet with answer key

All questions with answers
  1. Which extinguishing medium is suitable for cooking oil fires?

    • 1 Wet chemical
    • 2 Foam only
    • 3 Dry powder only
    • 4 Water
    Show answer

    Correct answer: Wet chemical

    Wet chemical is designed for cooking oil and fat fires.

    Report a mistake

  2. Water should not be used on:

    • 1 Paper fires
    • 2 Wood fires
    • 3 Textile fires
    • 4 Live electrical fires
    Show answer

    Correct answer: Live electrical fires

    Water conducts electricity.

    Report a mistake

  3. Portable fire-fighting equipment should be:

    • 1 Used only by the fire service
    • 2 Never inspected
    • 3 Hidden
    • 4 Sited, maintained and used by trained people
    Show answer

    Correct answer: Sited, maintained and used by trained people

    Siting, maintenance and training are all required.

    Report a mistake

  4. A manual call point is:

    • 1 A smoke detector
    • 2 A device for a person to raise the alarm
    • 3 A sprinkler
    • 4 A fire extinguisher
    Show answer

    Correct answer: A device for a person to raise the alarm

    It is part of a detection and alarm system.

    Report a mistake

  5. A smoke detector responds to:

    • 1 Smoke particles
    • 2 Light
    • 3 Heat only
    • 4 Noise
    Show answer

    Correct answer: Smoke particles

    Heat detectors respond to temperature.

    Report a mistake

  6. A heat detector is better than a smoke detector in:

    • 1 An office stairway
    • 2 A bedroom
    • 3 A corridor with no cooking
    • 4 A kitchen where smoke or steam may cause false alarms
    Show answer

    Correct answer: A kitchen where smoke or steam may cause false alarms

    Place the type according to the risk.

    Report a mistake

  7. Which medium is suitable for a class A fire?

    • 1 Water
    • 2 Sand only
    • 3 Wet chemical
    • 4 Carbon dioxide only
    Show answer

    Correct answer: Water

    Water cools and works on ordinary solids.

    Report a mistake

  8. Carbon dioxide extinguishers:

    • 1 Can be used on electrical and liquid fires and leave no residue
    • 2 Provide strong cooling
    • 3 Are for cooking oils only
    • 4 Are the best for wood fires
    Show answer

    Correct answer: Can be used on electrical and liquid fires and leave no residue

    They give little cooling.

    Report a mistake

  9. Dry powder extinguishers are suitable for:

    • 1 Liquids, gases and some metal fires
    • 2 No fires
    • 3 Cooking oil fires only
    • 4 Only wood fires
    Show answer

    Correct answer: Liquids, gases and some metal fires

    They have advantages and limits.

    Report a mistake

  10. Foam is suitable for:

    • 1 Liquids and solids
    • 2 Metal fires only
    • 3 Live electrical fires
    • 4 Gas jet fires
    Show answer

    Correct answer: Liquids and solids

    Foam is water based and conducts electricity.

    Report a mistake

  11. Wet chemical extinguishers are designed for:

    • 1 Electrical fires
    • 2 Cooking oil and fat fires
    • 3 Metal fires
    • 4 Gas fires
    Show answer

    Correct answer: Cooking oil and fat fires

    They are a special type for deep fat fryers.

    Report a mistake

  12. Portable extinguishers should be sited:

    • 1 Hidden away
    • 2 Far from the risk
    • 3 Locked in cupboards
    • 4 Near exits where people can find them
    Show answer

    Correct answer: Near exits where people can find them

    They must be maintained and used by trained people.

    Report a mistake

  13. Fire detection and alarm systems must be:

    • 1 Left untested
    • 2 Maintained and tested regularly
    • 3 Disabled at night
    • 4 Disconnected for false alarms
    Show answer

    Correct answer: Maintained and tested regularly

    Regular tests find faults early.

    Report a mistake

  14. Access for fire and rescue vehicles should be:

    • 1 Blocked by parking
    • 2 Locked
    • 3 Unmarked
    • 4 Planned and kept clear
    Show answer

    Correct answer: Planned and kept clear

    It helps firefighters reach the fire.

    Report a mistake

  15. Using the wrong extinguisher on a fire can:

    • 1 Cool it more
    • 2 Be harmless
    • 3 Make the fire worse or endanger the user
    • 4 Always put it out
    Show answer

    Correct answer: Make the fire worse or endanger the user

    Choose by the fire type.

    Report a mistake

More Workplace hazards topics