Home / Practice / NEBOSH IGC / Workplace hazards / 9.2 Hand-held tools
15 NEBOSH IGC Workplace hazards questions with answers and explanations.
Printable worksheet with answer key
Which hazard is common with powered hand tools?
A tool used in a flammable atmosphere should be:
Correct answer: Suitable and non-sparking
Sparks can ignite flammables.
A damaged hand tool should be:
When choosing a hand tool, a person should consider:
Correct answer: Suitability for the purpose and the place of use
Condition and fitness for use also matter.
A hazard of powered hand tools is:
Correct answer: Electric shock
Noise, vibration, dust and burns are also hazards.
A hazard of manual hand tools such as chisels is:
Correct answer: Cuts and flying particles
Mushroomed heads can break off.
A hand tool for use in a flammable atmosphere should be:
A tool that is blunt and in poor repair should be:
Correct answer: Taken out of use and repaired or replaced
Damaged tools should be tagged.
A control for entanglement with a powered hand tool is:
Correct answer: Removing loose clothing and tying back hair
Training and PPE help.
The right tool for the job:
Correct answer: Reduces the risk of injury and damage
Improvised use is a common cause of injury.
Safe storage of hand tools helps to:
Correct answer: Prevent damage and injury
Tools should be stored securely.
Guards on a power tool help to:
Correct answer: Protect against contact with moving parts and flying particles
A guard should not be removed.
Regular inspection of tools is needed to:
Correct answer: Find damage before it causes injury
Inspection supports maintenance.
Why are PPE needed with some hand tools?
Correct answer: To protect against particles, noise or dust when other controls are not enough
PPE is a last resort.
A worker uses a screwdriver as a chisel. The hazard is:
Correct answer: The tool may break and cause injury
Using a tool for the wrong purpose is unsafe.